英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • Bowsprit replacement? - SailNet Community
    My bowsprit is laminated with nine pieces, approximately 2 8” square, to form an 8” square The outside Stbd three of these are totally rotted for about 12” long The inner pieces are rotted only two laminations deep, about 17” long
  • Adding a bowsprit to a sailboat - iboats Boating Forums
    Re: Adding a bowsprit to a sailboat Thanks for that thought Is there any reason why you can't or shouldn't run a bowsprit on a sloop rig I understand about the new stay for the bowsprit and the bobstay It seems to me that it might make for better light wind performance to be able to run a larger genoa or a drifter on the forward stay
  • Retractable Bowsprit DIY - SailNet Community
    Catalina Direct: Cruising Spinnaker Retractable Bowsprit Kit note that the kit is specifically recommended for the C27 I'm not suggesting that you should fly a monster chute off a 10' homemade sprit, but the benefits of a sprit are well documented and the sprit seems to be the future of sailing, especially when used with 'code' sails
  • Pros Cons of Bowsprit? - SailNet Community
    A properly designed modern boat shouldn't require a bowsprit for the primary head sail For an asymetric, a retractable bowsprit is a good option, which will reduce your dock marina fees, as it is not a permanent increase in the LOA of the boat
  • Bowsprit sizing question - SailNet Community
    Ready to start the design of a short bowsprit to rig a light air genaker on a furler Have the load data from the sailmaker, curious if any engineering types can point me in the right direction I really like some of the retractable ones on the market, but it's not really necessary to retract, and they are a lot of money!
  • DIY Bowsprit - SailNet Community
    Normally the bowsprit is located a little off center with the outboard end in the center line sugerpeople said: Is it worth it, or should I just attach the tack of the genaker to the tack of the genny (inside the forestay)?
  • Retractable Bowsprit DIY | Page 2 | SailNet Community
    -Tighten tack (done by hand) to pull the furler out on the end of the bowsprit-Hoist-Unfurl while taking in on active sheet If I need to use the spinnaker pole (normally light conditions DDW) -set spinnaker boom on mast-Put the windward guy in the jaw if the spinnaker pole-Adjust Topping lift Foreguy-Winch in on guy while easing tack
  • TY 37 bowsprit drawing - SailNet Community
    The Ty37 bowsprit is easy to rebuild as a DIY project The strakes are alternating teak and 'an unknown asian softwood' The rot is usually only in the 'softwood' and once disassembled and cross-bolts removed the bowsprit laminations will easily come apart with a few blows with a mallet (and chisel) to break loose the poor polyester 'glue'
  • Adding a Bowsprit - SailNet Community
    Bowsprit Hi Bob I'm trying to do the same thing Yesterday I kicked out the broken sprit of our 42 Vagabond ketch I'm starting to call around to find a wood shop with that kind of a log so it can be cut to size, the thing has to be 8 feet long weight of 80 pounds, more or less I'll keep looking for your answer when someone can post it chuckg
  • Why Paint Bowsprit? - SailNet Community
    The bowsprit on Argyle was two types of mahogany, laminated from three or four strips It was painted white but there was significant rot on one of the types of mahogany so I chose to replace it After doing some research, I decided to replace it with Douglas fir





中文字典-英文字典  2005-2009