英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：

quell    音标拼音: [kw'ɛl]
vt. 压制,平息,减轻

压制,平息,减轻

quell
v 1: suppress or crush completely; "squelch any sign of
dissent"; "quench a rebellion" [synonym: {squelch}, {quell},
{quench}]
2: overcome or allay; "quell my hunger" [synonym: {quell}, {stay},
{appease}]

Quell \Quell\, v. t. [OE. quellen to kill, AS. cwellan,
causative of cwelan to die; akin to OHG. quellen to torment,
Icel. kvelja. See {Quail} to cower.]
1. To take the life of; to kill. [Obs.] --Spenser.
[1913 Webster]

The ducks cried as [if] men would them quelle.
--Chaucer.
[1913 Webster]

2. To overpower; to subdue; to put down.
[1913 Webster]

The nation obeyed the call, rallied round the
sovereign, and enabled him to quell the disaffected
minority. --Macaulay.
[1913 Webster]

Northward marching to quell the sudden revolt.
--Longfellow.
[1913 Webster]

3. To quiet; to allay; to pacify; to cause to yield or cease;
as, to quell grief; to quell the tumult of the soul.
[1913 Webster]

Much did his words the gentle lady quell. --Spenser.
[1913 Webster]

Syn: to subdue; crush; overpower; reduce; put down; repress;
suppress; quiet; allay; calm; pacify.
[1913 Webster]


Quell \Quell\, n.
Murder. [Obs.] --Shak.
[1913 Webster]


Quell \Quell\, v. i. [imp. & p. p. {Quelled}; p. pr. & vb. n.
{Quelling}.] [See {Quail} to cower.]
[1913 Webster]
1. To die. [Obs.]
[1913 Webster]

Yet he did quake and quaver, like to quell.
--Spenser.
[1913 Webster]

2. To be subdued or abated; to yield; to abate. [R.]
[1913 Webster]

Winter's wrath begins to quell. --Spenser.
[1913 Webster]

105 Moby Thesaurus words for "quell":
allay, alleviate, annihilate, appease, asphyxiate, assuage,
beat down, bend, bottle up, break, break down, bring low,
bring to terms, calm, calm down, censor, choke, choke off,
clamp down on, compose, conquer, cool, cork, cork up,
crack down on, cradle, crush, damp down, drown, dulcify, ease,
even out, extinguish, fell, flatten, gag, gentle, hold down,
humble, humiliate, hush, jump on, keep down, keep under, kill,
lull, master, mitigate, moderate, mollify, muzzle, overcome,
overmaster, override, overwhelm, pacify, pour balm into,
pour water on, prostrate, put down, put out, quash, quench, quiet,
reduce, repress, rest, ride down, rock, rock to sleep,
shut down on, silence, sit down on, sit on, smash, smooth,
smooth down, smooth over, smoothen, smother, snuff out, soothe,
squash, squelch, stabilize, stamp out, stanch, steady, stifle,
still, strangle, stultify, subdue, subjugate, suffocate, suppress,
throttle, trample down, trample out, trample underfoot,
tranquilize, tread underfoot, tyrannize, unman, vanquish

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • Ability to hide split face lines - Autodesk Community
    Split face lines are still selectable when their hosts are hidden I use working 3D views which hide walls, but the split faces on those walls are still selectable, which is unexpected behavior Please hide split face lines when their hosts are hidden, or give us a category to hide them
  • Solved: Extruding at an angle? - Autodesk Community
    I swear that in a prior version of Fusion 360, the Extrude command (in Model) had an angle manipulator that let you pick the extrusion direction Now it seems as though that is missing and right-angle extrusions are the only possible kind Am I imagining that?
  • How to add text in new autodesk fusion 360 - Autodesk Community
    Step 1 Right click on the workplane or planar body face where you would like to place text Step 2 Left click select New Sketch Step 3 Select sketch Text as shown in @jhackney1972 a image File>Export and then Attach your * f3d file here if you can’t figure it out and someone will create a video using your actual file
  • Solved: Reveals + Splitting Wall Surface - Autodesk Community
    My problem was that I confused "Split Face" with the "Split Element" tool Select a Wall > select "Split Face" (icon looks like a 90's computer screen) > go to a corner and draw a singular, diagonal line > select "Finish Edit Mode" (Screenshot attached) Now, magically, the reveals separate the exterior face of the wall for materials to be applied
  • How to explode 3D faces made up by lines? - Autodesk Community
    That's one hell of a trick to simulate a 3d face then, not helpful for me I am familiar with the 2 links you sent, 3DF2PL LISP is what I use to explode 3DFACE to become POLYLINE and then explode it once more to become LINES different from this one I understand now why it cannot be exploded Thank you and have a great day
  • Solved: Change Family Host Type - Autodesk Community
    6 The Family is now converted to Face-Based and may be saved exported from this Project to a separate file for later use Note: Only certain Categories are available for Copy Monitor If the desired Family is not of one of these, you can edit the Family prior to this process and temporarily change it to an applicable Category and then change
  • Cannot place families on linked models - Autodesk Community
    To host families on elements in linked files, you need face-based families Wall-based families won't attach to linked walls, Ceiling-based families won't attach to linked ceilings, etc You can also convert a Wall-Based Family to a Face-Based Family with the following steps: 1 Create a new Project, draw a Wall, and load the Family into it 2
  • How to wrap a text around e. g. a cylinder? - Autodesk Community
    There are approaches with "split face", but this only projects in parallel, so that it's not possible to really wrap the letters around It's not about putting the text along the length of the cylinder, but around the circle of the cylinder, e g around a cup And ideas? Thanks, Ralph
  • Solved: Upside down lighting fixtures - Autodesk Community
    Place on face hosting will flip the fixture to the correct orientation in the Ceiling Plan Without using the reflected Ceiling Plan the best method is in an elevation view draw a reference plane from RIGHT to LEFT and name it and set the elevation
  • Solved: How do I flip invert faces - Autodesk Community
    With the "Normals" Menu removed from the Maya Hotbox, how do I flip faces? to get the correct face to show (not show black, but show gray) Solved! Go to Solution





中文字典-英文字典  2005-2009