英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：

plywood    音标拼音: [pl'ɑɪw,ʊd]
n. 夹板,合板

夹板,合板

plywood
n 1: a laminate made of thin layers of wood [synonym: {plywood},
{plyboard}]


请选择你想看的字典辞典：
单词字典翻译
plywood查看　plywood　在百度字典中的解释百度英翻中〔查看〕
plywood查看　plywood　在Google字典中的解释Google英翻中〔查看〕
plywood查看　plywood　在Yahoo字典中的解释Yahoo英翻中〔查看〕

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • Wood Suppliers Near Phoenix Arizona - LumberJocks Woodworking Forum
    DESCRIPTION: Large warehouse with architectural grade plywood and veneers, hardwood lumber (both domestic and import), laminates, acrylics and composites Heldt Lumber 5712 N 7th St, Phoenix, AZ 85014 (602) 277-3378 DESCRIPTION: danoaz: Mostly construction grade material with lots of plywood Outside yard with covered wood storage
  • Safest Way to Connect 1 2 Plywood Joints
    But, I've used pocket hole screws in 1 2" plywood a hundred times, at least Never had it fail (I do always use glue as well when building cabinets anyways) I also own one of the mini biscuit joiners that Ryobi used to make It has come in handy many, many times for things like this as well I used it for a number of years before Kreg hit the
  • Are dowels affective in plywood? - LumberJocks Woodworking Forum
    The plywood hole will soak up a lot of glue and the dowel may swell some Too much glue will cause more problems than too little Not all plywood is equal Use a good grade with as many layers as you can find 11 ply baltic birch has very few hidden voids I use 1 4 dowels in plywood
  • How to screw into the edge of plywood? - LumberJocks Woodworking Forum
    Using a Kreg softwood plywood coarse thread self-tapping 1 1 2 inch screw, I fastened together two pieces of 3 4" baltic birch plywood butt jointed at 90 degrees to each other The side with the head of the screw touching it was predrilled halfway through the plywood because I was simultaneously testing a plug cutter
  • Which plywood is best for a record storage wall unit
    One of these would be to use two 78" x 15" lengths of 3 4" plywood sandwiched together for the 4 inner verticals, for an overall thickness of 1 50", and use 3 4" plywood for the 4 outer verticals, and the top and bottom horizontal pieces I plan to cut dadoes in the verticals to support the 15" x 15" horizontal shelves
  • Plywood from big box stores - LumberJocks Woodworking Forum
    Good prices for what I've been using, which is mostly poplar and pine I don't recall seeing any plywood in the showroom, but I wasn't really looking for it at the time I've also tried Marson and Marson's, another local hardware store lumber yard Their lumber is all outside getting snowed on and their plywood didn't look any better than HD or
  • Threaded inserts in plywood - LumberJocks Woodworking Forum
    Threaded inserts, like many fasteners, come in hardwood and softwood versions Typically, this means a finer thread and a smaller mounting hole With that in mind, is plywood considered softwood or hard wood? My thinking is that plywood is less dense than say maple or cherry and so the softwood inserts would be more appropriate Thoughts?
  • Drawer bottoms, what do you use? - LumberJocks Woodworking Forum
    It really depends on the project For a piece of furniture, I would use either baltic birch or veneer core core plywood It would also depend on what type of wood is used for the drawer sides For shop cabinets or such, I will use just 1 4" BC plywood so that I have one pretty good side I have also been using Arauco plywood which I get a Menards
  • best material for workbench top - LumberJocks Woodworking Forum
    Is there any reason not to use plywood with formica laminate? formica chips , can catch , plywood splinters , , MDF or Melamine ,and repace as needed , U usually cover a sturdy bench top with 3 8" or 1 2" replaceable material Its nice to have mdf so you can screw into when needed , but nice to have Melamine for glue cleanup
  • What wood to use for French Cleat System?
    Remember that you are going through 3 4" of plywood and probably another 1 2 - 3 4" of drywall before you hit a stud, so you could be getting as little as 1" of the screw into the stud I would use 3 5" lag screws, just make sure to countersync them so the heads do not sit proud of the surface of the cleat





中文字典-英文字典  2005-2009