英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：

grommet    
n. 金属扣眼,索环

金属扣眼,索环

grommet
绝缘环

grommet
n 1: fastener consisting of a metal ring for lining a small hole
to permit the attachment of cords or lines [synonym: {cringle},
{eyelet}, {loop}, {grommet}, {grummet}]

grommet \grom"met\ (gr[o^]m"m[e^]t), n. [F. gourmette curb, curb
chain, fr. gourmer to curb, thump, beat; cf. Armor. gromm a
curb, gromma to curb.]
1. A ring formed by twisting on itself a single strand of an
unlaid rope. Sometimes written {grummet}.
[1913 Webster]

2. Any eyelet or ring of metal or other material inserted in
a hole in a sheet of some other material; in sailing, a
metallic ring in or for a sail or a mailbag.
[1913 Webster]

3. A ring of rubber or other insulating material inserted in
a hole in some surface of a device, to prevent wires
passing through the hole from making contact with the
surface; used especially in electrical and electronic
devices, to prevent undesired electrical contact.
[PJC]

4. (Mil.) A ring of rope used as a wad to hold a cannon ball
in place.
[1913 Webster]


请选择你想看的字典辞典：
单词字典翻译
grommet查看　grommet　在百度字典中的解释百度英翻中〔查看〕
grommet查看　grommet　在Google字典中的解释Google英翻中〔查看〕
grommet查看　grommet　在Yahoo字典中的解释Yahoo英翻中〔查看〕

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • Cant get the PCV grommet out | IH8MUD. com Forum - IH8MUD Forum
    Best is to hold the grommet with a 90° mini pick and 90° Offset Long Reach plier and push it down then turn and retrieve it while you still hold it Just be careful not dropping it I used these pliers and mini pick to get the grommet out: 2 Pc 11 in Straight 90° Offset Long Reach Pliers Mini Pick and Hook Set
  • Check Engine Light On After Replacing PCV Valve and Grommet
    I saw the PCV valve was a cheap item to replace so I purchased an OEM one with a new grommet and installed them today When I went to start the car my CIL and VSC off and VSC trac lights are now on I had some trouble removing the rubber grommet because it was so hard and brittle, but I was able to get all the pieces out using some tweezers
  • Rubber grommets in door wiring? | IH8MUD. com Forum - IH8MUD Forum
    Door wiring loom is NLA Mounting hole 30mm and total width of this grommet is 40mm HJ60 "Snow white
  • PCV Valve Grommet Piece Fell In Valve Cover - IH8MUD Forum
    Hi everyone! I am in the process of replacing the PCV valve and grommet and of course the old grommet was rock hard I managed to get nearly all of it out but a small portion of the bottom part of the grommet (about 4-5mm x 4-5mm) chunk fell into the corner I tried shop vac and then some narrow pliers, and a pick but no luck getting it out
  • Cant get old PCV valve grommet out - IH8MUD Forum
    Don't sweat getting this grommet out I've changed out several like this and the easiest way I have found is to use some duct tape or gorilla tape Take a few strips and tape up the grommet Push the strips in and catch the underside as good as you can I then use a knife or even a small chisel to cut up the grommet enough to get it out
  • What kind of grommet do you use for wires going to roof rack?
    While I have my interior ripped out, I thought it would be a good time to run all sorts of wires preemptively for all the doodads I may or may not want in the future One of those things is to run wires through the top for aux lighting etc for the future roof rack What kins of grommet or other
  • PCV grommet crumbled into valve cover - IH8MUD Forum
    So while I was attempting to pull the PCV valve out of my mom's LX I utterly destroyed the hardened grommet, parts of which fell down into the valve cover The rig has about 260k and the valve cover gasket could sure be replaced I know this isn't too tough a job, and the spark plug seals are
  • running wires cables through the firewall. - IH8MUD Forum
    I snaked 1 0 through the main harness grommet in the upper passenger firewall - right behind the airbox I found it surprisingly easy There are a few blanks in the grommet that can be used to create a good seal, and no drilling required
  • Why does my SBC 350 run like crap with a PCV valve?
    The valve is brand new, so I am wondering if maybe the grommet sucks or I am pulling frwsh air from the breather Well, you've got to be some kind of bad ass to survive room temperature pork 1972 FJ55, 350, NV4500, full float, lockers, disc brakes, etc
  • Notes on replacing steering shaft firewall boot (2 Viewers) - IH8MUD Forum
    The Grommet is flexible for a reason The bearing squeaked at every turn of the wheel 1996 FZJ80, 2005 Avalon, 2004 Corolla (DD), 2004 Lexus RX330, 1982 Honda CT110, 2005 Lexus GX470





中文字典-英文字典  2005-2009