英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：


请选择你想看的字典辞典：
单词字典翻译
realismo查看　realismo　在百度字典中的解释百度英翻中〔查看〕
realismo查看　realismo　在Google字典中的解释Google英翻中〔查看〕
realismo查看　realismo　在Yahoo字典中的解释Yahoo英翻中〔查看〕

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • How I Fixed High TX Retry Rates on U6-Pro Access Points
    Specifically, I was experiencing high TX retry rates, which was quite frustrating After some research, I found a helpful guide on Evan McCann's blog about advanced Wi-Fi settings for Unifi devices Following the advice from this blog, I was able to resolve the issues with my U6-Pro
  • Optimizing WiFi Connectivity and Reducing Latency
    For home networks with few competing devices and minimal interference, follow these steps to maximize performance: Minimize interference by choosing the least congested channel To learn more about how low interference and airtime utilization is a key part of network planning, see our article on Resolving WiFi Performance Issues
  • Solved: TX retries dropped packets - Cisco Community
    I'm starting to see a high amount of TX retries for my 2 AP's, this has started after the FPR was introduced into the network I can see packets are being dropped on the outside interface 1 2, pasted the stats below Can these packet drops be the reason behind the retires, if so what can i do?
  • These Wi-Fi Retry Percentages Are Too Dang High (no really. . . Retry . . .
    Looking at the output for show ap debug client-table, it can seem pretty simple to get a retry percentage for a given client: Take the number in the 'Tx_Retries' column, divide it by the number in the 'Tx_Pkts' column and voila!, Retry%
  • Why so many retires, but only on wifi interface - Extreme Networks
    There are many reasons for high transmit retry % in a network: 1- Too many Clients and too less of APs Radios 2- RF interference caused by the neighboring APs, it could be adjacent channel or co-channel interference
  • What are tx retries and how to reduce them? : r Ubiquiti - Reddit
    how can I reduce the tx retries with my setup of the AC mesh ap? both aps are hard wired
  • Wi-Fi: too many Tx excessive retries and Invalid misc
    I suspect it is because iwconfig reports large numbers of "Tx excessive retries" and "Invalid misc" -- tens of both immediately after boot, thousands after an hour of relatively casual use (email, connection to a remote machine via RDP)
  • 802. 11 Retries, what do they mean? - NetAlly
    When using the EtherScope™ nXG to analyze WiFi traffic, one of the things you may notice is “Retries ” In this tech tip, we are going to go through what they are, what causes them, and how they look in Wireshark, when captured Each time a WiFi device transmits a data frame, it must receive an acknowledgment from the receiving device
  • Troubleshooting poor performance | Wireless Access - Airheads Community
    When running "show ap debug client-table ap-name <ap-name>" I can see all clients with good SNR (>35) However the Tx_Retries for these clients is extremely high (~30% of the Tx_Pkts for all the clients connected to this AP)
  • Understanding Distributed Radio Resource Provisioning
    To prevent interference between APs, the FortiOS WiFi Controller features Distributed Automatic Radio Resource Provisioning (DARRP) Through DARRP, each FortiAP unit autonomously and periodically determines the channel that is best suited for wireless communications





中文字典-英文字典  2005-2009