英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：


请选择你想看的字典辞典：
单词字典翻译
056418查看　056418　在百度字典中的解释百度英翻中〔查看〕
056418查看　056418　在Google字典中的解释Google英翻中〔查看〕
056418查看　056418　在Yahoo字典中的解释Yahoo英翻中〔查看〕

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • POLYUREA – SPRAY ELASTOMERIC COATINGS - specialty-products. com
    POLYUREA – SPRAY ELASTOMERIC COATINGS SYNERGY SERIES LPG™ (LOW PRESSURE PROPORTIONER) SPRAY FOAM POLYUREA COATING PRODUCT PORTFOLIO NEW INDUSTRY INNOVATION Storage Temperature: AQUASEAL HI-RISE 3X™ must be stored at tempera-tures between 60° to 100°F (16° – 38°
  • Polyurea Spray Coating Systems - The Polyurea Company
    of proper application equipment These polyurea systems must be processed through high pressure, high temperature impingement mix type equipment in order to achieve the optimum atomization and qualities for a coating These systems are generally much faster in reactivity and are unaffected by changes in humidity and ambient temperature
  • High Performance Polyurea Spray Coating - Johnson Fine
    Polyurea coating is sprayed with a machine-grade spray gun with a high-pressure heating device Generally, the pressure must be kept at 1500~2500PSI (100~170 kg cm2) continuously, and the temperature should be maintained at 55-75℃ (131-167℉) When spraying, the vertical distance between the spray gun and the ground is about 45-65cm
  • Quick Guide to Polyurea Substrate Preparation - Oak Ridge Foam . . .
    7 Assess Ambient Conditions Beyond surface prep, don’t overlook environmental factors like humidity and surface temperature Before you start, relative humidity should be below 85% and surface temperature should be at least 5°F above the dew point Check both ambient and substrate temperatures per product guidelines 8
  • Silcor® 780 HI-LP Hybrid polyurea, spray-applied waterproofing membran
    Main Heater Temperature 60°C to 75°C Line Heater Temperature 60°C to 75°C Spray Pressure 2200 to 3000 psi Round pattern spray gun mix chambers will minimise overspray produced considerably This product may also be suitable for 1:1 by volume, low-pressure dispensing machines fitted with static mix spray heads Suitability
  • CHEMSPRAY™ 790 | Resource | GCP Applied Technologies
    Hose Heater Temperature: 60°C to 75°C Spray Pressure (while spraying): 170 bar to 200 bar (2500 to 2800 psi) Polyol to Iso Spray Pressure Difference: Max 21 bar (300 psi) Round pattern spray gun mix chambers and tips will minimise product overspray significantly but may produce visible ridging in successive application passes Flat pattern
  • Oct 2017 Fosroc Polyurea WH 200 constructive solutions
    Fosroc® Polyurea WH 200 Processing parameters Block Temperature o: +65 C to +75oC Hose Temperature o: +65oC to +75 C Volume ratio : 1:1 Pressure : 120-150bar Tack free Time : 15 seconds Walkable : 10 minutes Trafficable (light duty) : 24 hours Fully Serviceable : 2-3 days Refer to Application section below and Fosroc Polyurea
  • Polyurea | Polymer
    Advantages of Polyurea Spray Applied Roofing Can be applied 365 days per year -even onto a wet roof Ambient Temperature has to be between 5 degrees – 40 degrees Wind Speed Maximum 15 miles per hour Substrate Temperature has to be 3 degrees above Dew Point Pressure of Spray machines has to be 140 Bar ©2020 by Polyurea Fusion
  • Fast setting, pure polyurea elastomeric waterproof coating.
    For a bonded polyurea coating application, concrete substrate must have achieved at least 75% of its design strength Concrete relative humidity must be ≤ 75% Do not proceed with application if the substrate temperature or the ambient temperature is, or is anticipated to be, < +5ºC during the application
  • Silicone Epoxy – SuperSkinSystems
    Mix 1A (Hardener) to 1B (Resin) thoroughly with a hand drill jiffy mixer Coating may be applied using roller, brush or low pressure pot spray Spraying may require up to 10% solvent such as aromatic 100 or xylene Working time (gel time) at 75°F is 40 minutes unless altered by solvent dilution, ambient temperatures and substrate temperature
  • AKFIX POLYUREA 1044 (STANDARD PURE)
    Polyurea Application: The polyurea must be applied within 12-24 hours of applying the primer Isocyanate prepolimer and amine resin must be applied using a two component high pressure and heat spray machine The machine should be able to spray the components in 1:1 volume ratio Both components must be heated above 70 °C
  • The surface preparation of polyurea - Polyswell Polyurea
    Testing the ambient temperature, humidity and dew point before applying polyurea, the humidity should less than 80%, the substrate temperature must be 3℃ (5℉) above the dew point, which is very important! Spray polyurea is isocyanate reacted with resins, and this system don’t allow to add solvents, A side and B side react very quickly
  • FlexTain® 60 - VersaFlex
    Low Pressure Spray LS 45™ Ambient Cure; LS 75™ Ambient Cure; Joint Fill Systems SL 45™ Joint Sealant; 60 is a pre-sprayed composite panel system comprised of non-woven polypropylene geotextile and a 100% solids pure polyurea membrane system FlexTain 60 may be used by itself or in combination with other materials to produce wearing
  • Polyurea Spray Coating Systems - Boat Design
    of proper application equipment These polyurea systems must be processed through high pressure, high temperature impingement mix type equipment in order to achieve the optimum atomization and qualities for a coating These systems are generally much faster in reactivity and are unaffected by changes in humidity and ambient temperature





中文字典-英文字典  2005-2009